JSP - Stickers / Decals

-: Tools Required :-



JSP – Stickers / Decals
Applicator (bank card can also be used)

-------------------------------------------------------------------------------

In this guide we will show you how to apply Car window Decals / Stickers.

-------------------------------------------------------------------------------

1. Clean the window thoroughly, ensuring that there is no grease or dirt on the surface.



-------------------------------------------------------------------------------

2. Peel the backing from the decal, Making sure none of the decal is left
on the backing. The best way to do that is to roll the backing down
and away from the decal.



-------------------------------------------------------------------------------

3. Once the backing is fully remove, you should be left with this.



-------------------------------------------------------------------------------

4. Apply the decal onto the surface using the frame arrround the decal to line it up.



-------------------------------------------------------------------------------

5. Use the applicator to press the decal onto the surface, start from the middle
and work your way to the edges, this stops air being trapped and causing bubbles.



-------------------------------------------------------------------------------

6. Once you have sufficiently pressed the decal down, peel the masking tape front sheet
away slowly making sure all the decal remains on the surface..



-------------------------------------------------------------------------------

7. If part of the decal does lift off, use the applicator to hold it down as you continue
removing the front sheet..



-------------------------------------------------------------------------------
8 . Once all of the front sheet is removed you should be left with something like this.



-------------------------------------------------------------------------------

9 . Remove the frame from the decal as this is only for application and not part
of the actual design, the frame should remove easily as it is still fresh, but if not
you can use a blade of some sort to get it started.



-------------------------------------------------------------------------------

10 . The finished decal should look something like this.



-------------------------------------------------------------------------------