Here we have our current Tuner Project.
A Celica GT4 ST205.
We received the car in almost standard trim with a few small modifications.
The bodywork needed attention as did a few other areas but the engine was strong.

Standard Engine Bay

As you can see from the picture the engine was pretty standard with the exception
of the hks intake and filter.

After a little bit of work and servicing the engine now looks a little bit more interesting.

Current Engine Bay (21/05/10)


Current Interior (06/05/10)


Current Exterior (06/05/10)



Current Specification list:-

BodyWork / Exterior

Modified C-One Front Bumper
Eurou Aero Kit SideSkirts
Rays Volks TE37 Alloys In Custom Bronze
JSP Prototype Headlight Air Intake Vent

Interior

Momo Steering Wheel
AutoMeter Boost Gauge
JSP Custom Gauge Mount
HKS Turbo Timer
Sparco Torino 2 Bucket Seats

Suspension / Chassis / Brakes

-> BC Coilovers <-
-> Front EBC Grooved and Drilled Disks <-
-> Front EBC Yellow Stuff Pads <-
-> Rear EBC Grooved and Drilled Disks <-
-> Rear EBC Yellow Stuff Pads <-
20mm rear spacers
JSP Battery Relocation Kit
-> WhiteLine Adjustable Rear ARB <-
-> JSP Poly Front ARB Bushes <-
-> Superflex Trailing Arm Bushes <-
-> JSP Uprated Crush Tubes <-
Internal Drive Wheel Nuts

Engine

Blitz NUR Spec R Exhaust System
JSP Prototype 2.5" Flexi Downpipe/De-Cat
-> JSP Downpipe Support Bracket <-
JSP Prototype Dump Valve
-> JSP Ventilation Relocation Kit (VR KIT) <-
-> JSP 4" Straight Air Intake Kit <-
JSP Prototype Carbon / Aluminium Air Box
JSP Manual Boost Controller
JSP Vacuum Distribution Manifold (VDM)
JSP Aluminium Heat Shields
Custom 11 LED Rev / Shift Light
JSP Prototype Aluminium Catch Tank
Apexi SAFC II
-> JSP Extreamly High Temp Heat Wrap <-
JSP Prototype FMIC Kit

Transmission

-> JSP Poly Gear Linkage Bush Kit <-
-> JSP Gen6 Shifter Base Bush Kit <-
Helix 6-Puk Paddle Clutch
JSP Prototype Poly Rear Diff Mount

Performance Stats

275bhp & 276lb/ft torque @ 1bar
12.9sec 1/4 mile time
160mph @ 6820rpm - Tested Top Speed




Plenty more to come on the car, our aim is to build a torque Designed 1/4 mile car.

All of our own products are available to purchase from our store.
We are developing new parts for the GT4 all the time so check the site regularly to
make sure you dont miss out.